FUTURE SOIL
Couldn't load pickup availability
PRO SERIES HYDRO LEVEL is a liquid soil adjuvant designed to improve water distribution and nutrient efficiency in fast-draining, hydrophobic and clay-contaminated profiles. It is suitable for sand, sandy loam, perlite, gravel, pebbles and loose growing media.
Unlike conventional wetting agents that move with water, HYDRO LEVEL binds directly to mineral surfaces and continues influencing later irrigations.
CORE FUNCTIONALITY AND BENEFITS
HYDRO LEVEL coats mineral particles with a functional “mineral skin” that changes how water moves through the profile.
Horizontal Spreading
Creates a wider, flatter wetting pattern—bridging dry gaps and expanding moisture availability across the root zone.
Nutrient Distribution
Builds a broader, connected water pathway so dissolved nutrients, fertilisers and compatible additives spread further instead of being lost through vertical bypass.
Clay-Fines Flocculation
Carries a light charge to draw dispersed clay fines into larger flocs—reducing pore blockage and restoring water movement through clay-affected sand.
Resource Efficiency
Helps reduce irrigation water and fertiliser loss below active roots while supporting more even moisture and growth.
PERFORMANCE DATA
Boundary Bend sandy-loam trial
- More than 100% wider horizontal water spread
- 33.7% less mid-test drainage
- Approximately 20% better modelled irrigation efficiency
Kagome tomato study
- 24% higher yield
- 78% less blossom-end rot
- 58% less fruit rot
Hydrophobic golf-sand trial
- Improved water movement into the profile
- Turf remained playable following treatment
APPLICATION
Apply as a diluted liquid through standard spray or irrigation equipment 0.1% v/v
- Standard loose profiles: 2 mL/m²
- Hydrophobic or severe dry patches: 5 mL/m²
- Clay-contaminated sand: 10 mL/m²
Dilute with at least 1 L of water per m².
Apply evenly to moist soil and water in lightly.
HYDRO LEVEL begins working with the next irrigation.
Apply monthly until the profile is treated and water behaviour is corrected. Then top up twice yearly—or when soil movement causes the problem to return.
Application Guide
Application Guide
BEST RESULTS
- For sandy or sandy-dominant soils.
- Dilute with water and apply to moist soil.
- Water in evenly to distribute through the surface.
- Maintain normal irrigation after application.
FIRST TREATMENT – MOISTURE & SLURRY CONTROL
Dry Patches / Uneven Wetting: 5 mL/m²
Slurry-forming or quicksand-like sands (over-irrigated, silty, unstable sands): Apply: 10 mL/m²
(Water in evenly with application.)
OPTIONAL FOLLOW-UP
If dry patch or slurry behaviour persists, apply 2 mL/m² every 4–6 weeks until balance is restored.
Water in as per initial application.
REAPPLY IF
Dry patch returns.
Water runs straight through the profile.
Sand becomes slurry-like when saturated from clay contamination
Seasonal stress increases (heat, traffic, irrigation changes).
FAQ's
FAQ's
Will HYDRO LEVEL fix dry patch in sandy soil?
Yes.
HYDRO LEVEL evens moisture movement in sand so water spreads instead of skipping dry areas or draining straight through.
Dry patch commonly occurs in hydrophobic sands and sandy loams where irrigation water fails to distribute evenly. HYDRO LEVEL improves lateral moisture spread without compacting or binding sand.
Will it reduce puddles and muddy spots?
Yes.
By improving surface moisture distribution, HYDRO LEVEL reduces puddling and muddy patches caused by uneven watering or over-irrigation.
This is especially useful in sandy areas where water pools at sprinkler or drip points and leaves surrounding areas dry.
Will it make my sand hard or compact?
No.
HYDRO LEVEL does not bind, cement, or harden sand. Treated areas remain free-draining and workable.
It controls how water behaves in sand, not the physical structure of the soil.
Is HYDRO LEVEL just another wetting agent?
No.
Wetting agents help water enter soil.
HYDRO LEVEL controls where water goes after it enters.
This helps prevent water racing straight through the profile or pooling at the surface.
How long does HYDRO LEVEL last?
Longer than standard wetting agents.
Reapply only when dry patch, puddling, or uneven wetting returns, or after major soil disturbance.
There is no fixed reapplication schedule.
Is it safe for lawns, gardens, and vegetable beds?
Yes.
When used as directed, HYDRO LEVEL is safe for turf, ornamentals, and edible plants.
When do I need to reapply?
Reapply when:
- dry patch returns
- water runs straight through the soil
- muddy or boggy patches reappear
- soil has been disturbed or renovated
- seasonal stress increases (heat, traffic, irrigation changes)
Can I overapply HYDRO LEVEL?
Using more than recommended won’t improve results.
Low, even application works best.
Will it work with sprinklers and irrigation systems?
Yes.
HYDRO LEVEL is compatible with sprinklers, drip irrigation, hose-on application, and tank watering systems.
What soils should I NOT use HYDRO LEVEL on?
Do not use on:
- heavy clay soils
- soils needing structural remediation
For clay soils, use FUTURE SOIL® CLAY FIXER instead.
Can I use HYDRO LEVEL with Liquid Biochar?
Yes.
HYDRO LEVEL controls how water spreads through sand. Liquid Biochar can be added separately to increase nutrient holding (CEC) and biological capacity.
Used together, HYDRO LEVEL improves moisture distribution, while Liquid Biochar helps retain nutrients and support root-zone biology. Each product does a different job and they can be applied independently or as part of a broader soil program.
